Naomi – Author at Plaster & Disaster

Today I’m going to switch gears a bit from my own dining room redecoration (what do you mean, is it because I’m behind on my next project?) and talk instead about some progress going on in my parents’ dining room. Specifically, an awesome new family photo wall that they just completed!

Pretty, right? Yes, they learned a lot of tips and tricks along the way that you can use to make an awesome photo wall of your own. And, yes, this does also mean that you’ll get to see a picture of me as a baby in this post.

But let’s get into it.

Family Photo Wall Tips

You’ve seen this room before as part of my “eco decorating” tour of their house, which uses a lot of sustainable and environmentally friendly materials and products. (Also see here, here, and here.)

The room is basically a big bay window flooded with light.

The photos were destined for the long wall that runs between the kitchen on one side and the living room on the other, with a console table beneath it (basically right behind the camera in the photo above).

It’s a lot of real estate! The open space on the wall is about 12′ x 3′ and could be totally filled with photos. Still, they had to be really selective with the photos, which brings us to our first tip:

Tip #1: Be Realistic About the Number of Photos You Can/Want To Fit

In this 36 square foot space my parents could only fit about 40 photos. That seems like a lot, until you realize that they weeded it down from literally thousands. It was quite a project in itself just going through and organizing them all!

They were able to fit this many because they had a huge wall and because they went with relatively small sized photos. This also worked for them because the rest of the room was calm and uncluttered, with light colored walls and not a lot of busy elements and art. However, if you have a more cluttered room, you might do well to go with fewer photos that are a bit bigger. Photos add a lot of busy!

Tip #2: Decide who/what Qualifies

Narrowing it down is hard, so it will help to have some guidelines about who “makes it on the wall” vs. not. It can also make the whole wall make better sense – it would be strange to have a wall of mostly vacation photos, and then throw in one shot of your great-great-great aunt looking cranky in a severe dress.

Some ways that you can narrow it down include:

Historical or current? (I.e., does it include photos of people living now at their current ages, or does it look back only at times past?)
Ancestors or family memories? (I.e., are you trying to trace the family back as far as possible, or are you capturing the people you know now?)
Direct relatives or extended family and friends?
Do you want equal representation or will you select good quality photos/ones that you like? (This is especially important to think about for more distant ancestors, where there may not be a “good” photo to include.)

My parents decided that it was a historical wall that would try to trace the family back as far as we had photos for. That means there are no current photos: people on the wall have passed away, or are in a historical photo as a child. Current family members will go on a different wall elsewhere in the house!

Tip #3: Chose Some Consistent Visual Elements and Stick With Them

Photo walls will get busy fast, so it really helps to have some unifying themes.

My parents chose to have all black and white photos, and even got some photos that they had reprinted to go along with this theme. They also chose to go with all silver frames, but to use a variety from many different sources so it would look more organic, including some antique ones that were original with the photos. My mom also advises looking on Etsy, particularly if you need options in non-standard sizes!

They also mixed in a handful of more casual photos/poses where they could, which prevents all the black and white from feeling stiff.

Keeping these things consistent helps the busy wall “hang” together. (See what I did there?)

Tip #4: Plan Out The Layout and Make it Meaningful/Interesting

Take the time to get the layout right, and try to group it in a way that makes sense.

My parents set it up so that each of their families started with the oldest photos at the far ends, and then came together to more recent photos and then photos of our nuclear family in the middle. This makes for a cool “coming together” effect!

They plotted it out in the basement for a long time, and got photos reprinted in different sizes so that the layout they envisioned would work.

I’ve also seen photo walls grouped by event, like as collections of photos from different weddings or at different locations, or by family units for larger families.

Tip #5: Use a Paper Template for Planning and Hanging

Some people do gallery walls by taping up cut-outs of different pictures on the wall to play around with layouts, but with the number of photos you’ll typically have in a photo wall that will get really hard to manage.

Instead, my parents made a paper template of the exact measurements of the wall (even marking in where the lamp would go, and where the light switches and thermostat are). They set it up in the basement where they could move the photos around over time to find the exact right positions.

This allowed them to trace the frames and make a small puncture exactly where each hook should go, and they could then use that to easily mark the wall for hanging!

Of course, still take it a few at a time and make sure the pictures are going up how you imagined it…

While this was a longer and more involved project than they thought it would be going in, it ended up really awesome!

Doesn’t it look great? The layout is orderly enough to look planned and under control, but there is enough variation to prevent it from looking stiff. Matching the style of frame to the age of the photo also helps it feel personal and authentic.

Also, by keeping some of those elements consistent, with all black and white photos and silver frames, they were able to fit in a lot without it being too busy. With the calmness of the room overall, this is an eye-catching feature that doesn’t overwhelm the space.

So where am I in all this? Look right over the plant:

I hope the tips were helpful, and that you enjoyed seeing the update to this room!

Do you have a photo wall, and if so, did you make the same or different choices on these elements? Are there important choices that I missed capturing here? Other tips?

By its very nature, DIY gets you into some unpredictable situations. That’s part of the fun of it: you start a project and see where it takes you. Sometimes you run into a situation that you didn’t anticipate, so you improvise.

We talk a lot about disaster on the blog, but we don’t often highlight the times when things don’t go wrong exactly, but they do go sideways. We’ve done some pretty ridiculous things to finish projects. Here are just a few:

That time Naomi built a scary furniture tower in her dining room

When Naomi went to swap out the light in her dining room for her new chandelier, she was confronted by an unexpected surprise: a giant hole in the ceiling that the previous light had covered.

But no worry, it could be covered up with a ceiling medallion! In a post that she actually had the gall to call a tutorial, she described her method for keeping the medallion pressed tight against the ceiling while the adhesive caulk dried. Use tiny screws like everyone else? Absolutely not!

Instead, she built an extremely precarious furniture tower in the middle of the dining room. The top was even wedged with odd bits of paper to get a tight seal.

But in the end, it worked pretty well! The ceiling medallion is safely attached, and with no tiny holes left by screws.

We’ll call it a victory, although certainly not an elegant one.

That time Sage swept – er, painted – her hallway

Sage doesn’t exactly have towering ceilings, but the stairwell did present a minor challenge to paint given that the corners were out of reach and it would have been challenging to, say, balance a chair on the stairs.

They make paintbrushes on extension poles, but why pay for that when you could just tape a paintbrush to the end of a broom?

Worked like a charm.

That’s totally how professionals get their perfect results, right?

That time Naomi used a dremel instead of a screwdriver

Novels ~~could be~~ have been written about everything that went wrong when Naomi opted to install hanger bolts into her cabinet legs herself rather than pay someone about $2 each to do it for her.

What seemed like a DIY adventure quickly turned into a DIY horror story as those. darn. bolts. just. wouldn’t. go. in. all. the. way.

That tiny quarter inch would be a big problem for the project, because the cabinets wouldn’t be straight and sturdy on their legs.

Instead of figuring out how to fix the problem the correct way, Naomi did what any frustrated DIYer would do – just cut the damn things off.

She screwed the leg hardware on, and then used a dremel with a metal cutting attachment to cut off the excess.

Overkill? Maybe. But it worked!

That time Sage was a totally competent plumber

As part of her kitchen renovation, Sage replaced the double basin sink with a single basin, literally the best decision of the entire project. But it wasn’t exactly smooth sailing when it came to removing the garbage disposal — the pipe fittings attaching the sink to disposal just wouldn’t budge, so Sage eventually resorted to a highly technical process:

Yes, she sawed the pipes right in half. Of course that left her with a pipe remnant still clinging to dear life on the disposal:

So she designed a super impressive system of clamps and channel lock pliers to twist the pipe fitting in the right direction and loosen it.

Yes she’s a genius, but we definitely aren’t going to claim she’s a professional plumber.

That time we decapitated cutlery

As extremely competitive people who also keep a rigorous schedule of DIY projects and posts for fun, the allure of a DIY competition is irresistible.

It’s led us down some ridiculous paths which we pretty much never talk about (sarcasm) – like that time that we made an award winning table out of a plastic cactus that was featured on Apartment Therapy or that time we won $5000 on a national reality TV show. Not that we’re bragging, or anything.

But the ridiculous DIY competition that we rarely talk about, for obvious reasons, is that time we ended up competing over who could make the best project out of cutlery.

You read that right. Cutlery.

After much brainstorming (escargot tong earrings, anyone?) we decided the only approach to making silverware palatable as a decor item was to remove the part that looks like silverware.

Naturally, this led to us decapitating a bunch of spoons:

Which ended up leaving one of the saddest/creepiest piles of DIY scraps that we ever saw (until the Popsicle stick fingernails, of course).

Even though we pulled together the project into a halfway decent mirror in the end, we have to just consider this whole experiment ridiculous.

That time the Tiny Bloggers followed the wrong advice

Finally, we hoped that the Tiny Bloggers would bring a breath of fresh air and sanity to this blog, but apparently the influence is rubbing off the other way. They’ve proven that they are just as ridiculous as we are.

Take their recent room reveal:

Think that overhead light looks nice? Well, how do you think they got it up there?

That’s right, they followed Naomi’s advice and decided it would be a good idea to simply glob on some glue and then build a precarious tower of furniture and books to hold it up while the glue dried.

We bet that’s super secure for a little kid’s room, guys.

Well, we guess that shatters any illusion of expertise that we may have built up over the years by accident! Now that we’ve shared ours, tell us your most ridiculous DIY approach in the comments! (Or better yet, send photos.)